-
Doğru Kalkış ve İniş Alanını Eşik Gösteren Ankastre Helipad İniş Işıkları
AH-HP/C Heliport Inset Bidirectional Light for Heliport Taxiway and Runway Description Heliport Inset bidirectional light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles. It could be used as Center Line Light, Runway Threshold/End Light, Runway Edge Lighting etc. The emitting color is green/green or yellow/red or yellow/green or red/green. Packaging & Delivery Packaging: Plastic bag with outer paper carton 1
-
Yoğunluk 100cd Helipad İniş Işıkları Ankastre Pist / Taksi Yolu Lambası 20 Watt
Bue LED Helipad Landing Lights Inset Runway and Taxiway Light Product Description 1. Product Name:Heliport light 2. Mode: AH-HP-I 3. Standard: ICAO Annex 14 4. Light intensity: 100cd 5. Emitting color:Green or yellow 6. Light source: LED 7. Service life of LED: ≥100,000hours 8. Operating voltage: AC220V, 50/60 Hz(Option voltage,eg.AC120V,DC48V) 9. Power consumption: 20W 10. Working Mode : Steady-burning mode Compliance l ICAO Annex 14 Volume II Heliports 5.3.7, 5.3.8 l FAA AC
-
LED Ankastre Helipad İniş Işıkları / Heliport Aydınlatma FATO TLOF Işık NVG IR LED
LED Inset Helipad Landing Lights / Heliport Lighting FATO TLOF Light NVG IR LED 850nm Touchdown and lift-off area light emitting green steady burning light at night or in the daytime with poor visibility to provide good visibility. It shall be placed along the edge of the area designated for use as the Touchdown and lift-off area or within a distance of 1.5 m from the edge. Aiming point lights shall be collocated with the aiming point marking. It always emitting white steady
-
Hedefleme Noktası Helipad Iniş Işıkları LED Helipad Ankastre Yeşil Işık Basınç Direnci Lens
LED Helipad Inset light is always be installed at locations where the lights are frequently knocked down by aircraft or maintenance vehicles.Protect thr aircraft and extend lamp life. It could be used as Aiming point light, perimeter light of FATO (Final approach and take-off areas), TLOF (Touchdown and lift-off areas), taxiway, runway, flight path Lighting, etc. The emitting color is green or yellow or white or blue. Die-casting aluminum covered by black hard anodizing layer
-
IP66 Su geçirmez Helikopter Yükseltilmiş Işığı 100.000 Saatlik Yaşam Süresi ve 360° Işın Açısı
LED Heliport Elevated Light Professional aviation obstruction lighting solution for heliport FATO edge and runway applications, designed for optimal visibility and safety. Product Specifications Product Type Aviation Obstruction Lights Product Name LED Heliport Elevated Light Light Source LED Input Voltage DC48V and AC(110-240VAC), DC12V Available Colors Green, Yellow, White, Red, Blue, IR Beam Angle 360° horizontal, ≥10° vertical divergence Light Intensity ≥50cd Flash
-
IP66 LED Helipad Giriş Işığı, 360° ışın açısı ve havacılık engelleri için ICAO standart yoğunluğu
AH-HP-I LED Helipad Inset Light The AH-HP-I LED Helipad Inset Light is designed for installation in locations where lights are frequently exposed to aircraft or maintenance vehicle impact. This aviation obstruction lighting features a 360° horizontal beam angle, IP66 rating, and meets ICAO standard intensity requirements with white emitting color. Applications This heliport inset light is suitable for use as aiming point light, perimeter lighting for FATO (Final Approach and
-
Pilot NVG için FATO Yükseltilmiş Helipad İniş ışıkları
Helilport FATO Elevated Light Helipad Landing Lights Infrared LED for pilot using NVG(Night Vision Goggles) SPECIFICATIONS AH-HP-E1 LED Heliport Elevated Light Light Characteristics Light Source Ultra high intensity LED Available Colors Green, Yellow, White, Red, Blue, IR Intensity(cd) ≥50cd Horizontal Output(degrees) 360 Vertical Divergence(degrees) ≥10 Flash Characteristics Steady burning Operation Mode 24hours operation LED Life Experience(hours) >100,000 Electrical
-
Helipad iniş ışıkları rüzgar konisi, kırmızı beyaz, heliport Dahili Işıklı rüzgar gösterge ışığı
Helipad landing lights wind cone, red white, heliport Internally Illuminated wind indicator light Heliport Wind Cone is to indicate the wind direction of the final approach and take-off, it can make a general indication to the wind speed. According to the ICAO provisions for each airport must be set at least one wind vane. Its installation location must not interferenced by nearby objects or the airflow blowed by the rotor, and must be guaranteed the helicopter can be clearly
5s
+1
Submission successful!
